BMT L100-1S-2

General

[available since BMT Software version 0.237]

Read the section about Adding a new AddOn Device.

Controlling the L100-1S-2 Laboratory Pump with the BMT Software.

Each computer needs to be licensed for usage of the L100-1S-2 Laboratory Pump with the software.

Software

Additn a pump by its SlaveId to the Modbus line (standard is 1). After connecting the pump the control interface is loaded with current pump values.

Control parameter

Function	Description
Manuel / Program	Switch between manual and program mode.
start	Starting the pump with current RPM speed and direction.
CW / CCW	Setting up the rotation direction of the pump.
RPM-control	Setting the rotation speed by text field and setup button or slider from 0 to 100 rpm.

Program control

Name	Description
single	The functions of the program table will be run once.
repeat	The functions of the program table will be repeated.
repeat endless	The repeating is endless and will only be stopped when the exception is stopped using the program stop button in the controller or program details.
repeat time	The program table will be repeated for the time entered in this field.
Program table	This table shows the configuration of the different program steps. It is possible to re-order or delete the entries using the buttons at the right of the table, or the table menu using the right mouse klick. It is also possible to edit rows of the program table for reconfiguration.
Program types	switch = pump running parameter RPM = rotation speed CW / CCW = Rotation direction Time = Time of program action